InRow SC, 300mm, Air Cooled, Self-contained 200-240v 50Hz

Includes: Exhaust Duct Kit , Installation Guide , Operations and Maintenance Manual

ACSC101Features

InRow SC, 300mm, Air Cooled, Self-contained 200-240v 50Hz

• Active response controls
  Monitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.
• Automatic restart
  Returns the unit to its last operating status in the event of a power failure.
• Dry contact output
  Provides remote notification of failures when used with APC environmental monitoring unit or system.
• Easy to install
  Innovative design allows for fast, easy installation by almost anybody.
• Fault-tolerant fan system
  In the event of a fan failure, the remaining fan(s) will continue to operate.
• Field replaceable components
  Fans and electronics module can be readily replaced without uninstalling the unit.
• Horizontal airflow pattern
  Removes heat close to the source of generation in the hot aisle and distributes cold air to the front of the racks in the cold aisle.
• Network interface
  Provides management by connecting the device directly to the network with a dedicated IP address, avoiding the need for a proxy such as a server. Management is available via Web browser, Telnet or SSH. Notification features inform you of problems as they occur.
• Predictable cooling
  Placing the unit in the row of racks moves the source of cooling closer to the heat load. This eliminates air mixing and provides a predictable cooling architecture.
• Remote management
  Remote monitoring of key alarm conditions such as fan failure and leak detection via SNMP, telnet, and web browser is possible with optional Remote Monitoring Unit, specifically designed for the High-Density Cooling Enclosure.

InRow Direct ExpansionFeatures & Benefits

Agility

• Scaleable densities
  Allows for higher densities to be achieved by integrating containment with room, row and rack cooling system architectures.
• Modular design
  Modular design provides scalable solutions to add cooling as demand increases.

Serviceability

• Easy service access
  Allows for all serviceable components to be replaced/maintained by easily accessible panels/doors.

Total Cost of Ownership

• Variable speed fans
  Variable speed fans reduce energy consumption during off-peak cooling periods.
• In-Row architecture
  Captures hot exhaust air directly from the IT equipment, thereby increasing the unit's sensible cooling capacity over traditional cooling architectures.

Manageability

• Real-Time capacity monitoring
  Real-time display of current and available cooling.
• Microprocessor controller
  Utilizes intelligent, active response control, and real-time monitoring. The system is controlled by a microprocessor providing high level control functionality and human interface via a four line, eighty character, alphanumeric display
• Building management system integration
  Send alarms and data points allowing you to manage critical building infrastructure from a single system.

Availability

• Rack inlet temperature control
  Reduces the risk of hot spots at the rack level
• Active response controls
  Monitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.
• Predictable cooling
  Placing the unit in the row of racks moves the source of cooling closer to the heat load. This eliminates air mixing and provides a predictable cooling architecture.

  Input

  • Input frequency
    50 Hz +/- 3 Hz
  • Input Connections
    IEC 309 16A 2P+E
  • Number of Power Cords
    1
  • Input Power
    2390.0Watts

  Communications & Management

  • Control panel
    Multi-function LCD status and control console

  Physical

  • Maximum Height
    1991mm , 199.1cm
  • Maximum Width
    300mm , 30.0cm
  • Maximum Depth
    1069mm , 106.9cm
  • Rack Height
    42U
  • Net Weight
    165.92kg
  • Shipping weight
    273.18kg
  • Shipping Height
    2156mm , 215.6cm
  • Shipping Width
    762mm , 76.2cm
  • Shipping Depth
    1138mm , 113.8cm
  • Color
    Black

  Environmental

  • Storage Temperature
    0 - 40 °C
  • Storage Relative Humidity
    0 - 95 %
  • Storage Elevation
    0-4500meters
  • Audible noise at 1 meter from surface of unit
    80.0dBA

  Conformance

  • Approvals
    BSMI, C-tick, CE, EN 55022 Class A, FCC Part 15 Class A, GOST, ICES-003, UL Listed, VDE, VCCI
  • Standard warranty
    1 year (parts only), 1 year on-site repair or replace with factory authorized Start-Up

  Sustainable Offer Status

  • Other Environmental Compliance
    China RoHS

  General

  • Air Discharge Patterns
    Horizontal
  • Air Flow
    566.34lps
  • Amp Draw In-Rush
    65.0A
  • Compressor Type
    Rotary
  • Condensate Pump Capacity
    0.002lps
  • Intake Air
    Rear Return
  • Refrigerant Charge
    1.36pounds