InRow RP Chilled Water 380-415V 50 Hz

Includes: Installation Guide , Operations and Maintenance Manual

ACRP502Features

InRow RP Chilled Water 380-415V 50 Hz

• Electric Reheat
  Prevents overcooling during dehumidification.
• Humidifier
  Humidity is managed through a self-contained steam canister humidifier for maximum efficiency and ease of maintenance. The pure steam canister maintains consistent capacity output, and requires very little or no scheduled maintenance.

InRow Chilled Water CoolingFeatures & Benefits

Manageability

• Building management system integration
  Send alarms and data points allowing you to manage critical building infrastructure from a single system.
• Microprocessor controller
  Provides proactive control and real-time monitoring via a four line, eighty character, alphanumeric display.
• Real-Time Capacity Monitoring
  Real-time display of current and available cooling.

Agility

• Casters
  Provides flexibility to move the unit to wherever cooling is required.
• Scaleable densities
  Allows for higher densities to be achieved by integrating containment with room, row and rack cooling system architectures.
• Modular design
  Modular design provides scalable solutions to add cooling as demand increases.

Serviceability

• Easy service access
  Allows for all serviceable components to be replaced/maintained by easily accessible panels/doors.

Availability

• Active response controls
  Monitors and actively adjusts cooling capacity to ensure proper server inlet temperatures. Through the microprocessor controller, visibility into the operation and health of the unit is provided.
• Top and bottom chilled water connections
  Allows chilled water to be connected from the top, if routing from overhead, or bottom, if on a raised floor.
• Rack inlet control
  Rack inlet control guarantees inlet temperature to IT equipment.
• Dual A-B power inputs
  Draws power from the UPS for power protection with dual feeds for redundancy.
• Predictable cooling
  Placing the unit in the row of racks moves the source of cooling closer to the heat load. This eliminates air mixing and provides a predictable cooling architecture.

Total Cost of Ownership

• Row-based architecture
  Captures hot exhaust air directly from the IT equipment, thereby increasing the unit's sensible cooling capacity over traditional cooling architectures.
• Variable speed fans
  Variable speed fans reduce energy consumption during off-peak cooling periods.

  Input

  • Nominal Input Voltage
    400V 3PH
  • Input frequency
    50 Hz +/- 3 Hz
  • Input Connections
    Hard Wire 4-wire (3PH + G)
  • Number of Power Cords
    2
  • Input Power
    15000.0Watts

  Communications & Management

  • Control panel
    Multi-function LCD status and control console
  • Audible Alarm
    Audible and visible alarms prioritized by severity

  Physical

  • Maximum Height
    1991mm , 199.1cm
  • Maximum Width
    600mm , 60.0cm
  • Maximum Depth
    1070mm , 107.0cm
  • Rack Height
    42U
  • Net Weight
    352.73kg
  • Shipping weight
    463.18kg
  • Shipping Height
    2166mm , 216.6cm
  • Shipping Width
    850mm , 85.0cm
  • Shipping Depth
    1137mm , 113.7cm
  • Color
    Black
  • Units per Pallet
    1.0

  Conformance

  • Approvals
    cUL Listed, FCC Part 15 Class A, GOST, Industry Canada
  • Standard warranty
    1 year (parts only), 1 year on-site repair or replace with factory authorized Start-Up

  Sustainable Offer Status

  • Other Environmental Compliance
    China RoHS

  General

  • Air Discharge Patterns
    Horizontal
  • Air Flow
    2831.68lps
  • Condensate Pump Capacity
    0.008lps
  • Humidification Value
    6.6pounds/hour
  • Intake Air
    Rear Return
  • Minimum Water Inlet Temperature
    7.0 °C