TEL:021-3152 3588    Join Now   Sign In   Cart -  中文
Product Name : G3HT10K3IB1S
Item# : 20359-965
Model : 20359-965
Was Price: CNY0/pc
Now Price : CNY0/pc
Last update : 2016.12.30
Manufacturer :
More Picture:

MGE Galaxy 300

MGE Galaxy 300 10kVA 400V 3:1 with 10min Battery, Start-up 5x8
 

Effective three phase power protection against downtime and data loss for mission critical applications. UPS with long backup charger, supplied without batteries. To be used with external batteries. 

Includes: CD with software, Installation guide, Network Management Card, Start-Up Service, User Manual

G3HT10K3IB1S Features

5x8 Start-up service included
Required for full coverage of factory warranty
Wide input voltage range
Designed for harsh electrical environments to save battery life.
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

MGE Galaxy 300 Features & Benefits

Availability
Wide input voltage range
Designed for harsh electrical environments to save battery life.
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Dual feed input
Allows installation of two independent power sources with the option of hot stand-by configuration to provide redundancy for mission critical applications.
Serviceability
5x8 Start-up service included
Required for full coverage of factory warranty
Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.
Economy
Cost of acquisition
Designed to provide an optimized price/performance ratio, a number of exceptional features have been carefully selected to optimize both performance and cost benefits.
Convenience
Easy to install
Innovative design allows for fast, easy installation by almost anybody.
Manageability
Integrated network management
Provides complete remote monitoring and control of the UPS. Enables you to monitor remote UPS's from a web browser or industry standard Network Management System.

Output

Output Power Capacity
8000 Watts / 10 kVA
Max Configurable Power
8000 Watts / 0 VA
Nominal Output Voltage
230V
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load
91.9%
Output Voltage Distortion
Less than 3%
Output Frequency (sync to mains)
50/60 Hz +/- 5%
Other Output Voltages
220, 240
Crest Factor
2.5 : 1
Topology
Double Conversion Online
Waveform Type
Sine wave
Output Connections
(1) Hard Wire 3-wire (H N + G)
Output Voltage Tolerance
+/- 2% static and 100% load step
Output Voltage THD
< 3% linear load and <5% non-linear load
Overload Operation
60 seconds @ 120% and 30 seconds @ 145%
Efficiency at Half Load
89.6%
Required Output Current Protection
125A
Bypass
Built-in Maintenance Bypass

Input

Nominal Input Voltage
400V 3PH
Input Frequency
45 - 65 Hz
Input Connections
Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations
340 - 477V
Input voltage adjustable range for mains operation
323 - 437 (380V), 340 - 460 (400V), 357 - 477 (415V)V
Other Input Voltages
380, 415
Maximum Input Current
19A
Input Breaker Capacity
63 A
Input Total Harmonic Distortion
Less than 7% for full load
Type of Input Protection Required
gL fuse

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
End of Discharge Battery Voltage
+/-154 V

Communications & Management

Pre-Installed SmartSlot™ Cards
AP9630
Control panel
Multi-function LCD status and control console
Emergency Power Off (EPO)
Yes

Physical

Maximum Height
51.18 inches (1300 mm)
Maximum Width
15.75 inches (400 mm)
Maximum Depth
33.86 inches (860 mm)
Net Weight
512.60 lbs. (233.00 kg)
Shipping Weight
567.60 lbs. (258.00 kg)
Shipping Height
56.69 inches (1440 mm)
Shipping Width
31.50 inches (800 mm)
Shipping Depth
37.99 inches (965 mm)

Environmental

Operating Environment
32 - 95 °F (0 - 35 °C)
Operating Relative Humidity
0 - 95%
Operating Elevation
0-10000 feet (0-3000 meters)
Storage Temperature
14 - 140 °F (-10 - 60 °C)
Storage Relative Humidity
0 - 95%
Storage Elevation
0-30000 feet (0-9000 meters)
Audible noise at 1 meter from surface of unit
54.50 dBA
Online Thermal Dissipation
707.00 BTU/hr
Protection Class
IP 20

Conformance

Regulatory Approvals
CE, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, IEC 61000-4-5, IEC 62040-2, TUV, VFI-SS-111
Standard Warranty
1 year on-site repair or replace with factory authorized Start-Up

Sustainable Offer Status

RoHS
Compliant
REACH
REACH SVHC
PEP
Available in Documentation tab
EOLI
Available in Documentation tab
Battery Directive
Compliant
Battery Notes
Contains Lithium Coin Cell

 

| Clicks:

Online Server

Salesperson①
Salesperson②
Salesperson③
Engineer
Customer service