- Home
- About
- News
- Products
- Download
- Jobs
- Support
- Message
Product Name : AR2580
Item# : 105011-993
Model : 105011-993
Was Price: CNY0/pc
Now Price : CNY0/pc
Last update : 2016.12.13
Manufacturer :
More Picture：
NetShelter SV
NetShelter SV 42U 800mm Wide x 1200mm Deep Enclosure with Sides BlackWide and Deep Universal IT enclosure with increased enclosure width for more cable management options in denser server and networking applications. Includes integrated vertical 1U mounting spaces adjacent the enclosures standard EIA-310 equipment mounting u-spaces that can be removed and replaced with 1U accessories. Enclosures are deep to provide additional equipment clearance space or more open space for ease of access in the rear of the enclosure. 42U height to easily roll through doorways.
Includes: Baying hardware, Doors, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting Hardware, Pre-installed casters, Qty 4 - Bolt-down brackets, Roof, Side Panels, Unpacking sheet
AR2580 Features
Integrated vertical 1U mounting spaces800mm (32 in) wide enclosures include vertical 19" width 1U knockouts adjacent the enclosures standard EIA-310 equipment mounting u-spaces that can be removed and replaced with 1U accessories. Replace these knockouts with accessories such as patch panels, environmental management devices, Rack Power Distribution, or even pass-through brush strips for cabling pass-through.
NetShelter SV Features & Benefits
CompatibilitySchneider Electric Rack Systems CompatibleCompatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal - Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution.Vendor-neutral EIA-310 19in Rack Mounting Compatibility GuaranteedVendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19" equipment. The "Fits Like a Glove" money back guarantee provides peace of mind that all of your EIA-310-E compliant rack-mount equipment will physically fit in a NetShelter.ConvenienceCable access openings and panelsLarge cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Brushes included in roofs for 800mm (32 in) wide enclosures.Simple SelectionNo need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers.Perforated front and rear doorsPerforated front and rear doors provide ample ventilation for rack-mount equipment.Quick release doors with spring pin designFront door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple spring hinge pin design.Removable full-height side panelsSide panels are removable for ease of access to the enclosure during equipment installation and setup. Side panels are lockable utilizing a single key that is also usable on the front and rear doors.Enclosure adjustment tools and hardware providedAll enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment.AgilityPre-installed rear accessory mounting bracketsIntegrated and adjustable rear accessory mounting brackets provide zero U mounting locations for toolless accessories. Each bracket has two mounting bays to support a combination of up to four accessories such as Rack PDUs and vertical cable organizers mounted inside the rack. Adjust the brackets from their standard factory positions or install additional brackets (AR824002 - Qty 2) to install half enclosure height accessories such as cable managers and vertical Rack PDUs.Adjustable mounting rails with simple alignmentThe vertical mounting rails can be adjusted in 0.4 in (10 mm) increments covering virtually any mounting requirement for IT equipment. Align the mounting rails with the opposite side of the enclosure by identifying the hole position used. U positions are numbered front and back for rapid installation of equipment.Split rear doorsSplit rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing.Standard-profile castors and adjustable leveling feet from underneathEnclosures are shipped standard with both leveling feet and castors. Leveling feet can be adjusted using a wrench from underneath the enclosure.Joining hardware providedEnclosures include pre-installed joining hardware for joining enclosures in a row and provide additional stability to the enclosure. Enclosures are pre-installed with joining brackets for joining enclosures on 600-mm centers. Joining brackets for joining enclosures on 24-in centers are included with the provided hardware kit.Unassembled enclosure option (42U x 600mmW x 1060mmD) for unique sitesNot all installation sites have space clearance required to move and install standard height enclosures. This unassembled option is packaged for transport through narrow spaces and assembly at the installation site.SafetyEnclosure to floor bolt-down brackets providedEnclosure is delivered with bolt-down brackets that secure the enclosure to the pallet during shipment. These same bolt-down brackets can be utilized to bolt the enclosure to the floor at the final installation site.Integrated electrical groundingThe roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.Physical
Net Weight306.90 lbs. (139.50 kg)Maximum Height80.98 inches (2057 mm)Maximum Width31.50 inches (800 mm)Maximum Depth47.24 inches (1200 mm)Shipping Weight352.88 lbs. (160.40 kg)Shipping Height85.87 inches (2181 mm)Shipping Width35.43 inches (900 mm)Shipping Depth51.18 inches (1300 mm)Weight Capacity (static load)2205.00 lbs. (1002.27 kg)Weight Capacity (dynamic load)1014.00 lbs. (460.91 kg)Minimum Mounting Depth6.60 inches (168 mm)Maximum Mounting Depth36.10 inches (917 mm)Rack Height42URack Width19"ColorBlackConformance
Regulatory ApprovalsUL 2416, UL 60950-1Standard Warranty5 year repair or replaceStandardsEIA-310-ESustainable Offer Status
RoHSCompliantREACHREACH: Contains No SVHCs| Clicks:Home | About Us | Contact Us | Site Maps
Copyright 2004-2014 Veiton Network Studio www.veiton.com All rights reserved
沪ICP备18015660号-1 Southidc Technical Support VeitonCMS V17
沪公网安备 31010502000199号
- About
