SUVTP30KHS - APC,APC UPS,APC RACK,APC PDU,APC BATTERY,NETBOTZ.

UPS

Battery System

Racks

Power Distribution

NETBOTZ

Cooling

Surge Protection

DATA CENTER SOFTWARE

EPDU1132M

EPDU1016B-GB

EPDU1016B

SYPM10K16H

SYBT9-B6

Product Name : SUVTP30KHS
Item# : 9151-581
Model : 9151-581
Was Price: CNY0/pc
Now Price : CNY0/pc
Last update : 2016.12.12
Manufacturer :

More Picture：

Smart-UPS VT

APC Smart-UPS VT 30kVA 400V, w/Start-Up 5X8, Internal Maintenance Bypass, & Parallel Capability

APC Smart-UPS VT,24 kW /30 kVA,Input 400V 3PH /Output 400V 3PH, Interface Port DB-9 RS-232, SmartSlot

Includes: Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Start-Up Service, User Manual

SUVTP30KHS Features

Parallel-capacity capable

Increases total power capacity by using multiple uninterruptible power supplies simultaneously.

Parallel-redundant capable

Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT Features & Benefits

Availability

Dual mains input

Increases availability by allowing the UPS to be connected to two separate power sources.

Scalable runtime

Allows additional run time to be quickly added as needed.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Battery modules connected in parallel

Delivers higher availability through redundant batteries.

Serviceability

Battery replacement without tools

Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Shippable with modules installed

Enables pre-installation UPS staging and testing and faster installation.

Modular design

Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

Manageability

Network manageable

Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

LCD display

Alpha-Numeric Display which displays system parameters and alarms.

Audible alarms

Provides notification of changing utility power and UPS power conditions

Programmable frequency

Ensures compatibility with different input frequencies.

LED status indicators

Quickly understand unit and power status with visual indicators.

SmartSlot

Customize UPS capabilities with management cards.

Total Cost of Ownership

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Manual maintenance bypass

Reduces installation costs by eliminating the need for an external mechanical bypass.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Protection

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Cold-start capable

Provides temporary battery power when the utility power is out.

Output

Output Power Capacity

24 kW / 30 kVA

Max Configurable Power

24 kW / 30 kVA

Nominal Output Voltage

400V 3PH

Output Voltage Note

Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage

Efficiency at Full Load

96.4%

Output Voltage Distortion

Less than 5% at full load

Output Frequency (sync to mains)

47 - 53 Hz for 50 Hz nominal

Other Output Voltages

380, 415

Crest Factor

3 : 1

Topology

Double Conversion Online

Waveform Type

Sine wave

Output Connections

(1) Hard Wire 4-wire (3PH + G)
(1) Hard Wire 5-wire (3PH + N + G)
(1) Screw Terminals

Bypass

Built-in Maintenance Bypass, Built-in Static Bypass

Input

Nominal Input Voltage

400V 3PH

Input Frequency

47 - 70 Hz (auto sensing)

Input Connections

Hard Wire 5-wire (3PH + N + G)

Input voltage range for main operations

304 - 477V

Other Input Voltages

380, 415

Maximum Input Current

41A

Input Breaker Capacity

63 A

Batteries & Runtime

Battery Type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Communications & Management

Interface Port(s)

DB-9 RS-232, SmartSlot

Pre-Installed SmartSlot™ Cards

AP9631

Control panel

Multi-function LCD status and control console

Audible Alarm

Audible and visible alarms prioritized by severity

Emergency Power Off (EPO)

Yes

Physical

Maximum Height

32.40 inches (823 mm)

Maximum Width

20.59 inches (523 mm)

Maximum Depth

32.01 inches (813 mm)

Net Weight

401.50 lbs. (182.50 kg)

Shipping Weight

487.30 lbs. (221.50 kg)

Shipping Height

50.79 inches (1290 mm)

Shipping Width

28.34 inches (720 mm)

Shipping Depth

43.70 inches (1110 mm)

Environmental

Operating Environment

32 - 104 °F (0 - 40 °C)

Operating Relative Humidity

0 - 95%

Operating Elevation

0-3333 feet (0-999.9 meters)

Storage Temperature

32 - 104 °F (0 - 40 °C)

Storage Relative Humidity

0 - 95%

Storage Elevation

0-10000 feet (0-3000 meters)

Audible noise at 1 meter from surface of unit

55.00 dBA

Protection Class

IP 20

Conformance

Regulatory Approvals

C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111

Standard Warranty

1 year on-site repair or replace with factory authorized Start-Up

Sustainable Offer Status

| Clicks:

Online Server

Salesperson① Salesperson② Salesperson③ Engineer Customer service