TEL：021-3152 3588    Join Now   Sign In   Cart -  中文
  
UPS         
Battery System         
Racks          
Power Distribution         
NETBOTZ         
Cooling         
Surge Protection         
DATA CENTER SOFTWARE         
  
 EPDU1132M
 EPDU1016B-GB
 EPDU1016B
 SYPM10K16H
 SPR6KLB192V-7A-16P
 SYBT9-B6
HomeProductsUPSComputer and PeripheralBack-UPS-Pro
Product Name : BR1000G-CN
Item# : 1783-732
Model : BR1000G-CN
Was Price: CNY0/pc
Now Price : CNY0/pc
Last update : 2017.08.01
Manufacturer :
More Picture：

Back-UPS Pro

APC Power-Saving Back-UPS Pro 1000, 230V, China

APC Back-UPS Pro,600 Watts /1000 VA,Input 230V /Output 230V, Interface Port USB

Includes: CD with software, Telephone Cable, USB cable, User Manual, Warranty card

BR1000G-CN Features

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Always on Outlets
8 outlet models offer dedicated space to accommodate wide transformer blocks without covering adjoining outlets and 2 always on outlets. You can plug 8 power cords including 3 transformers at the same time. In case you have equipment that has to stay on all the time, such as fax machine, you can plug it in always on outlets. The equipment will be protected and will have power supply even when the unit is switched off.
Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Back-UPS Pro Features & Benefits

Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Cold-start capable
Provides temporary battery power when the utility power is out.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Serviceability
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Manageability
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Product Distribution

china

Output

Output Power Capacity
600 Watts / 1000 VA
Max Configurable Power
600 Watts / 0 VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Topology
Line Interactive
Waveform Type
Stepped approximation to a sinewave
Output Connections
(3) Chinese (Surge Protection)
(3) Chinese outlet (Battery Backup)

Input

Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
Australian/Chinese
Cord Length
6 feet (1.83 meters)

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
8 hour(s)
Replacement Battery
APCRBC123
RBC™ Quantity
1

Communications & Management

Interface Port(s)
USB
Control panel
Multi-function LCD status and control console
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

Surge energy rating
355 Joules
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)

Physical

Maximum Height
9.84 inches (250 mm)
Maximum Width
3.94 inches (100 mm)
Maximum Depth
15.04 inches (382 mm)
Net Weight
23.60 lbs. (10.73 kg)
Shipping Weight
28.00 lbs. (12.73 kg)
Shipping Height
13.39 inches (340 mm)
Shipping Width
9.25 inches (235 mm)
Shipping Depth
19.09 inches (485 mm)
Master Carton Units
2.00
Master Carton Weight
52.80 lbs. (24.00 kg)
Color
Black
SCC Codes
1073130428681 0
Units per Pallet
32.00

Environmental

Operating Environment
32 - 104 °F (0 - 40 °C)
Operating Relative Humidity
0 - 95%
Operating Elevation
0-10000 feet (0-3000 meters)
Storage Temperature
23 - 113 °F (-5 - 45 °C)
Storage Relative Humidity
0 - 95%
Storage Elevation
0-50000 feet (0-15000 meters)
Audible noise at 1 meter from surface of unit
45.00 dBA

Conformance

Regulatory Approvals
CCC
Standard Warranty
2 years repair or replace

Sustainable Offer Status

RoHS
Compliant
REACH
REACH: Contains No SVHCs
REACH SVHC
PEP
Available in Documentation tab
EOLI
Available in Documentation tab

 

| Clicks:

Online Server
Salesperson①
Salesperson②
Salesperson③
Engineer
Customer service