Performance 3 phase power protection specially designed for shore connection application, max capability up to 10 products in parallel.

Includes: Installation guide , Service Manual

G7TQ500CSFeatures

MGE Galaxy 7000 GFC Shore Connect 500KvA

• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Auto recognition of external batteries
  UPS recognizes when external battery packs are attached and automatically adjusts runtime.
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Configurable for N+1 internal redundancy
  Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
• Double conversion on-line topology
  Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
• Dual mains input
  Increases availability by allowing the UPS to be connected to two separate power sources.
• Manual maintenance bypass
  Reduces installation costs by eliminating the need for an external mechanical bypass.

Galaxy 7000Features & Benefits

Compatibility

• Parallel capability
  Multiple units can be placed in parallel to meet power capacity and redundancy requirements
• Output synchronization to external source
  UPS systems can be synchronized with any other independent source for use with downstream static transfer switches.
• Compatible with Schneider Electric's lithium ion battery solution
  Reduces system footprint and weight, cooling and maintenance requirements, and total cost of ownership; offers double the life of VRLA batteries; and improves backup storage predictablity and manageability.
  

Economy

• Advanced electrical features
  Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency
• ECO Mode
  Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
• Fully-rated power kVA equals kW
  Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.

Manageability

• Network management capability
  Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet.

Sustainability

• EU CoC for UPS
  Ensures that UPSs sold in the EU are highly efficient

Availability

• High availability architecture
  Different running modes : hot stand-by, integrated parallel, or centralized static switch for multi-modules leading to availability architectures

  Output

  • Output power capacity
    450.0 KWatts / 500.0 kVA
  • Max Configurable Power (Watts)
    450.0 KWatts / 500.0 kVA
  • Nominal Output Voltage
    400V 3PH
  • Neutral Output Current
    938A
  • Output Voltage Note
    Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
  • Output Voltage Distortion
    Less than 2%
  • Output Frequency (sync to mains)
    50 Hz, 60 Hz
  • Output Frequency (not synced)
    60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal
  • Other Output Voltages
    380, 415, 440
  • Load Crest Factor
    2.5 : 1
  • Topology
    Double Conversion Online
  • Waveform type
    Sine wave
  • Maximum Output Current
    2369
  • Output Connections
    (1) Hard Wire 4-wire (3PH + N) (Battery Backup)

    (1) Hard Wire 3-wire (3PH) (Battery Backup)

    (1) Hard Wire 4-wire (3PH - PEN) (Battery Backup)

    (1) Hard Wire 4-wire (3PH + G) (Battery Backup)

    (1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
  • Output Voltage THD
    < 2% linear load and <3% non-linear load
  • Bypass
    Built-in Maintenance Bypass

  Input

  • Nominal Input Voltage
    400V 3PH
  • Input frequency
    45 - 65 Hz
  • Input Connections
    Hard Wire 5-wire (3PH + N + G)
  • Input voltage range for main operations
    340 - 460 (400V)V
  • Input Total Harmonic Distortion
    Less than 3% for full load
  • Type of Input Protection Required
    3-pole breaker
  • Other Input Voltages
    380, 415, 450
  • Maximum Short Circuit Withstand (Icw)
    200.0kAmps
  • Maximum Input Current
    735.0A
  • Input Power Factor at Full Load
    1.0

  Batteries & Runtime

  • Battery type
    VRLA
  • Efficiency

   

  

   

  Communications & Management

  • Pre-Installed SmartSlot™ Cards
    AP9635CH
  • Control panel
    Multi-function LCD status and control console
  • Audible Alarm
    Audible and visible alarms prioritized by severity
  • Emergency Power Off (EPO)
    Yes
  • Available SmartSlot™ Interface Quantity
    1

  Physical

  • Maximum Height
    1900mm , 190.0cm
  • Maximum Width
    1812mm , 181.2cm
  • Maximum Depth
    855mm , 85.5cm
  • Net Weight
    1470.0kg
  • Shipping weight
    1490.0kg
  • Shipping Height
    2030mm , 203.0cm
  • Shipping Width
    1920mm , 192.0cm
  • Shipping Depth
    960mm , 96.0cm
  • Color
    Grey
  • # of Layers per Pallet
    1.0
  • # of Units per Layer per Pallet
    1.0

  Environmental

  • Operating Environment
    0 - 35 °C
  • Operating Relative Humidity
    20 - 80 %
  • Operating Elevation
    0-999.9meters
  • Storage Temperature
    -25 - 40 °C
  • Storage Relative Humidity
    20 - 80 %
  • Storage Elevation
    0-9000meters
  • Audible noise at 1 meter from surface of unit
    72.0dBA
  • Protection Class
    IP 20

  Conformance

  • Approvals
    CE, EN 60950, EN/IEC 62040-2, EN/IEC 62040-3, ISO 14001, ISO 9001, LCIE, VFI-SS-111
  • Standard warranty
    1 year repair or replace

  Sustainable Offer Status

  • Battery Directive
    Compliant
  • Battery Notes
    ts_Battery_Notes

  General

  • Bypass Connection
    4 wire (3Ph + N) or 5 wire (3Ph + N + G)
  • Bypass Protection Device
    800.0
  • Max Bypass Input Current
    844.0A