APC Back-UPS Pro External Battery Pack (for 1500VA Back-UPS Pro models)

Includes: User Manual

APC Back-UPS Pro External Battery Pack (for 1500VA Back-UPS Pro models)

• UPS compatible
  Uniquely designed to accept input power from any single phase, 120V power source such as a UPS, solar panel or other alternative energy power inputs.

Back-UPS ProFeatures & Benefits

Availability

• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Energy Management Function
  Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
• Transformer-block spaced outlets
  Protect equipment with input transformer blocks without blocking access to other receptacles.
• Boost and Trim Automatic Voltage Regulation (AVR)
  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Customizable voltage-transfer points
  Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
• Customizable voltage sensitivity
  Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Protection

• Battery and surge protected outlets
  Back up and protect your hardware and data during power outages, surges and spikes.
• Dataline surge protection
  Provides protection of connected equipment from power surges on the data lines.
• Surge only outlets
  Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Manageability

• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• LCD Status Display
  Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
• USB connection
  Use your PC to access additional power protection and management features for your UPS via a USB Port.

Serviceability

• Simple battery replacement
  Increases UPS availability by allowing quick, easy battery replacement.
• Resettable circuit breaker
  Easy recovery from overloads; no need to replace a fuse.

Marketing Features

• Energy Management Function
  Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• LCD Status Display
  Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
• Boost Automatic Voltage Regulation (AVR)
  Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
• Battery-protected and surge-only outlets
  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Safety

• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

  Output

  • Battery Output Voltage
    24

  Input

  • Number of Power Cords
    1

  Batteries & Runtime

  • Battery type
    Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Included Battery Modules
    2
  • Battery mounting
    Stand alone battery stack
  • Expected Battery Life (years)
    4 - 6
  • RBC Quantity
    1
  • Battery Volt-Amp-Hour Capacity
    372

  Physical

  • Maximum Height
    301mm , 30.1cm
  • Maximum Width
    112mm , 11.2cm
  • Maximum Depth
    382mm , 38.2cm
  • Net Weight
    13.4kg
  • Shipping weight
    14.6kg
  • Shipping Height
    400mm , 40.0cm
  • Shipping Width
    240mm , 24.0cm
  • Shipping Depth
    491mm , 49.1cm
  • Color
    Black

  Environmental

  • Operating Environment
    0 - 40 °C
  • Operating Relative Humidity
    0 - 95 %
  • Operating Elevation
    0-9000meters
  • Storage Temperature
    -15 - 45 °C
  • Storage Relative Humidity
    0 - 95 %
  • Storage Elevation
    0-15000meters

  Conformance

  • Approvals
    TUV
  • Standard warranty
    2 years repair or replace

  Sustainable Offer Status

  • RoHS
    Compliant
  • REACH
    REACH: Contains No SVHCs
  • PEP
    Available in Documentation tab
  • EOLI
    Available in Documentation tab